Oppo A5s Build time July 2019 ver a.25 Password Unlocked with MRTOKEY

Moderators: VC_INDIA, DYNET, zhulianqi, .::ARD::., Altaf_Azhari, Prince Rajpoot, simonng83

User avatar
.::ARD::.
Posts: 360
Joined: Tue Aug 13, 2019 7:16 pm
Has thanked: 133 times
Been thanked: 555 times

Oppo A5s Build time July 2019 ver a.25 Password Unlocked with MRTOKEY

Post by .::ARD::. » Wed Aug 28, 2019 9:13 am

Image


Image


Credited to : Jack flasher
Br,
.::ARD::.


__________________________________________________________
Image

ranaawaiss
Posts: 1
Joined: Sat Aug 24, 2019 7:06 am
Has thanked: 2 times

Re: Oppo A5s Build time July 2019 ver a.25 Password Unlocked with MRTOKEY

Post by ranaawaiss » Wed Aug 28, 2019 9:29 am

Test point share

jackflasher
Posts: 3
Joined: Sun Aug 25, 2019 5:21 am
Has thanked: 1 time
Been thanked: 2 times

Re: Oppo A5s Build time July 2019 ver a.25 Password Unlocked with MRTOKEY

Post by jackflasher » Wed Aug 28, 2019 10:27 am

MRT money printing equipment..

jack flasher

Br

jackflasher
Posts: 3
Joined: Sun Aug 25, 2019 5:21 am
Has thanked: 1 time
Been thanked: 2 times

Re: Oppo A5s Build time July 2019 ver a.25 Password Unlocked with MRTOKEY

Post by jackflasher » Wed Aug 28, 2019 10:29 am

ranaawaiss wrote:
Wed Aug 28, 2019 9:29 am
Test point share
don't use a testpoint just a volume button :D

jackflasher
Posts: 3
Joined: Sun Aug 25, 2019 5:21 am
Has thanked: 1 time
Been thanked: 2 times

Re: Oppo A5s Build time July 2019 ver a.25 Password Unlocked with MRTOKEY

Post by jackflasher » Wed Aug 28, 2019 10:30 am

ranaawaiss wrote:
Wed Aug 28, 2019 9:29 am
Test point share
As usual select the Oppo Tab select the A5s series
Click advanced format, click the Start button

Here the execution is somewhat different from before
Because the firmware position unit in the A25 series

After clicking start, the cell is turned off, press the Volume up button down, if it's read in the mrt, hurry up, release the volume up. Keep holding the volume down until it comes out. Write the Meta Mode on the cellphone.

If the execution is just press the vol button below the cell, lsg recovery mode cannot enter Meta Mode, this is possible because the ver already updated the firmware ..

for ordinary FRP *#813#

Br

Jack Flasher

Post Reply