Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Moderators: pdubs92, VC_INDIA, DYNET, zhulianqi, .::ARD::., simonng83, Prince Rajpoot, profkefah

pdubs92
Global Moderator
Posts: 57
Joined: Wed Aug 14, 2019 3:52 am
Location: MRT
Has thanked: 66 times
Been thanked: 25 times
Contact:

Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Post by pdubs92 » Thu Aug 15, 2019 6:53 pm

Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Code: Select all

>>>>É豸Çý¶¯Ê¶±ðÃû: 
    DBAdapter Reserved Interface
>>> ¼ì²âµ½ÊÖ»ú¶Ë¿ÚÊÇ:  COM21
    Flashing Block:sha256rsa
    Flashing Block:crc
    Flashing Block:curver
    Flashing Block:verlist
    Flashing Block:package_type
    Flashing Block:efi
    Flashing Block:xloader
    Flashing Block:fw_lpm3
    Flashing Block:fastboot
    Flashing Block:vbmeta
    Flashing Block:modemnvm_update
    Flashing Block:teeos
    Flashing Block:trustfirmware
    Flashing Block:sensorhub
    Flashing Block:fw_hifi
    Flashing Block:dts
    Flashing Block:kernel
    Flashing Block:recovery_ramdisk
    Flashing Block:recovery_vendor
    Flashing Block:recovery_vbmeta
    Flashing Block:erecovery_kernel
    Flashing Block:erecovery_ramdisk
    Flashing Block:erecovery_vendor
    Flashing Block:erecovery_vbmeta
    Flashing Block:ramdisk
    Flashing Block:cache
    Flashing Block:system
    Flashing Block:cust
    Flashing Block:modem_fw
    Flashing Block:vendor
    Flashing Block:version
    Flashing Block:odm
    Flashing Block:product
    Flashing Block:userdata
    all is done
Image
Image
WBR,
PDUBS
MRT-O-KEY TEAM

Avijormiteam
Posts: 8
Joined: Wed Aug 14, 2019 12:50 am

Re: Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Post by Avijormiteam » Thu Aug 15, 2019 10:39 pm

where I find the latest version of MRT-O-KEY HW FLASHER

zhulianqi
Site Admin
Posts: 36
Joined: Tue Aug 13, 2019 6:58 pm
Has thanked: 15 times
Been thanked: 351 times

Re: Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Post by zhulianqi » Fri Aug 16, 2019 12:50 am

in mrt 3.26 hw tool inside have hw flash

manojkumarpati
Posts: 4
Joined: Sat Aug 24, 2019 5:02 am

Re: Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Post by manojkumarpati » Sat Aug 24, 2019 7:00 am

pdubs92 wrote:
Thu Aug 15, 2019 6:53 pm
Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Code: Select all

>>>>É豸Çý¶¯Ê¶±ðÃû: 
    DBAdapter Reserved Interface
>>> ¼ì²âµ½ÊÖ»ú¶Ë¿ÚÊÇ:  COM21
    Flashing Block:sha256rsa
    Flashing Block:crc
    Flashing Block:curver
    Flashing Block:verlist
    Flashing Block:package_type
    Flashing Block:efi
    Flashing Block:xloader
    Flashing Block:fw_lpm3
    Flashing Block:fastboot
    Flashing Block:vbmeta
    Flashing Block:modemnvm_update
    Flashing Block:teeos
    Flashing Block:trustfirmware
    Flashing Block:sensorhub
    Flashing Block:fw_hifi
    Flashing Block:dts
    Flashing Block:kernel
    Flashing Block:recovery_ramdisk
    Flashing Block:recovery_vendor
    Flashing Block:recovery_vbmeta
    Flashing Block:erecovery_kernel
    Flashing Block:erecovery_ramdisk
    Flashing Block:erecovery_vendor
    Flashing Block:erecovery_vbmeta
    Flashing Block:ramdisk
    Flashing Block:cache
    Flashing Block:system
    Flashing Block:cust
    Flashing Block:modem_fw
    Flashing Block:vendor
    Flashing Block:version
    Flashing Block:odm
    Flashing Block:product
    Flashing Block:userdata
    all is done
Image
Image
bro kindly provide the rom link and tell me how to enable DBAdopter port ,in mrtokey when i put the mobile 1.0 mode and flash in 695 mode then it gose to fastboot mode then i put flash file and start flashing it says no DBAdopter port if select fastboot then it stars flashing but fail at vendor and create temporary file and the phone condition is same kindly help me to recover from this problem thanks

zhulianqi
Site Admin
Posts: 36
Joined: Tue Aug 13, 2019 6:58 pm
Has thanked: 15 times
Been thanked: 351 times

Re: Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Post by zhulianqi » Sat Aug 24, 2019 11:15 am

bro kindly provide the rom link and tell me how to enable DBAdopter port ,in mrtokey when i put the mobile 1.0 mode and flash in 695 mode then it gose to fastboot mode then i put flash file and start flashing it says no DBAdopter port if select fastboot then it stars flashing but fail at vendor and create temporary file and the phone condition is same kindly help me to recover from this problem thanks
if you com1.0 boot mobile to fastboot
in the software the port you need select fastboot!!!

and normal you flash mobile,
just power off,hold vol up and vol down,connect mobile to computer
mobile will slow you usb mode(erecovery) 5%
then you will see the port and select flash file click start flash it!!!

manojkumarpati
Posts: 4
Joined: Sat Aug 24, 2019 5:02 am

Re: Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Post by manojkumarpati » Sat Aug 24, 2019 1:03 pm

zhulianqi wrote:
Sat Aug 24, 2019 11:15 am
bro kindly provide the rom link and tell me how to enable DBAdopter port ,in mrtokey when i put the mobile 1.0 mode and flash in 695 mode then it gose to fastboot mode then i put flash file and start flashing it says no DBAdopter port if select fastboot then it stars flashing but fail at vendor and create temporary file and the phone condition is same kindly help me to recover from this problem thanks
if you com1.0 boot mobile to fastboot
in the software the port you need select fastboot!!!

and normal you flash mobile,
just power off,hold vol up and vol down,connect mobile to computer
mobile will slow you usb mode(erecovery) 5%
then you will see the port and select flash file click start flash it!!!
many many thanks bro but please give me a perfect rom download link thanks a lot

pdubs92
Global Moderator
Posts: 57
Joined: Wed Aug 14, 2019 3:52 am
Location: MRT
Has thanked: 66 times
Been thanked: 25 times
Contact:

Re: Honor 7X (BND-AL10) dead recover done by MRT-O-KEY HW FLASHER

Post by pdubs92 » Sat Aug 24, 2019 2:31 pm

manojkumarpati wrote:
Sat Aug 24, 2019 1:03 pm
zhulianqi wrote:
Sat Aug 24, 2019 11:15 am
bro kindly provide the rom link and tell me how to enable DBAdopter port ,in mrtokey when i put the mobile 1.0 mode and flash in 695 mode then it gose to fastboot mode then i put flash file and start flashing it says no DBAdopter port if select fastboot then it stars flashing but fail at vendor and create temporary file and the phone condition is same kindly help me to recover from this problem thanks
if you com1.0 boot mobile to fastboot
in the software the port you need select fastboot!!!

and normal you flash mobile,
just power off,hold vol up and vol down,connect mobile to computer
mobile will slow you usb mode(erecovery) 5%
then you will see the port and select flash file click start flash it!!!
many many thanks bro but please give me a perfect rom download link thanks a lot
for firmware google it or make request thread in viewforum.php?f=15
WBR,
PDUBS
MRT-O-KEY TEAM

Post Reply