Miezu MX4 Format done

Moderators: VC_INDIA, DYNET, zhulianqi, .::ARD::., Altaf_Azhari, Prince Rajpoot, simonng83

gsmanees
Posts: 0
Joined: Tue Aug 27, 2019 3:52 pm
Been thanked: 1 time

Miezu MX4 Format done

Post by gsmanees » Thu Dec 05, 2019 5:11 pm

Code: Select all

    Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
    Get Mobile Port is:  COM37
>>> Device driver identification: 
    MediaTek USB Port
>>> Mobile Has Connect...
    CPU_NAME: MT6595
>>> Reading Mobile Hardware Info...Success
    HW_Inf:  8A00    SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
    The Flash Hardware Info:AWMB3R
>>> Downloading Boot2 To Mobile Phone...
>>> Initializationing Mobile Hardware Parameter...Success
    =====================Flash Type(eMMC)==============
    Flash   Size: 0x00000003A3E00000 -> 14910M
    Flash     ID: 0x15010041574D4233
    Flash   Name: Samsung_Unknow
    Flash symbol: AWMB3R
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is:  COM66
>>> Device driver identification: 
    MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Software Auto Switch Hight Speed Has Enable...
>>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is:  COM66
>>> Device driver identification: 
    MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>> Extracting valid data from partition data...
>>>>Formating Mobile USER Data...
    ADD(HEX):0x007E800000    Size(HEX):0x0324580000    
    Corresponding operation completed!!!
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!