ASUS Z00UD FRP DONE BY MRT-O-KEY

Moderators: pdubs92, VC_INDIA, DYNET, zhulianqi, .::ARD::., simonng83, Prince Rajpoot, profkefah

pdubs92
Global Moderator
Posts: 57
Joined: Wed Aug 14, 2019 3:52 am
Location: MRT
Has thanked: 66 times
Been thanked: 25 times
Contact:

ASUS Z00UD FRP DONE BY MRT-O-KEY

Post by pdubs92 » Thu Aug 22, 2019 8:47 am

ASUS Z00UD FRP DONE BY MRT-O-KEY

Image

Code: Select all

>>>>Seaching Android FastBoot Devices...
    Get the Android Deivers
    ...
    OKAY [ -0.000s]
    finished. total time: -0.000s
    Corresponding operation completed!!!
>>>>Seaching Android FastBoot Devices...
    Get the Android Deivers
    ...
    OKAY [  0.000s]
    finished. total time: 0.000s
    Corresponding operation completed!!!
>>>>Seaching Android FastBoot Devices...
    Get the Android Deivers
    rebooting...
    
    finished. total time: 0.000s
    Corresponding operation completed!!!


Image

Code: Select all

   Searching Android Mobile...
    need power off your mobile
    and enaled usb debug
    please check mobile has tick enab auth...
    Get the Android Deivers
    Reading Mobile Device Info
    * daemon not running. starting it now on port 5037 *
    * daemon started successfully *
    ASUS_Z00UD

    Remove frp by usb debug...
    usage: am [subcommand] [options]

    usage: am start [-D] [-W] [-P <FILE>] [--start-profiler <FILE>]

                   [--sampling INTERVAL] [-R COUNT] [-S] [--opengl-trace]

                   [--user <USER_ID> | current] <INTENT>

           am startservice [--user <USER_ID> | current] <INTENT>

           am stopservice [--user <USER_ID> | current] <INTENT>

           am force-stop [--user <USER_ID> | all | current] <PACKAGE>

    am kill [--user <USER_ID> | all | current] <PACKAGE>

           am kill-all

           am broadcast [--user <USER_ID> | all | current] <INTENT>

           am instrument [-r] [-e <NAME> <VALUE>] [-p <FILE>] [-w]

                   [--user <USER_ID> | current]

                 [--no-window-animation] [--abi <ABI>] <COMPONENT>

           am profile start [--user <USER_ID> current] [--sampling INTERVAL] <PROCESS> <FILE>

           am profile stop [--user <USER_ID> current] [<PROCESS>]

    D> current] [-n] <PROCESS> <FILE>

           am set-debug-app [-w] [--persistent] <PACKAGE>

           am clear-debug-app

           am set-watch-heap <PROCESS> <MEM-LIMIT>

           am clear-watch-heap

           am monitor [--gdb <port>]

    w-restart]

           am restart

           am idle-maintenance

           am screen-compat [on|off] <PACKAGE>

           am package-importance <PACKAGE>

           am to-uri [INTENT]

           am to-intent-uri [INTENT]

           am to-app-uri [INTENT]

    itch-user <USER_ID>

           am start-user <USER_ID>

           am stop-user [-w] <USER_ID>

           am stack start <DISPLAY_ID> <INTENT>

           am stack movetask <TASK_ID> <STACK_ID> [true|false]

    >

           am stack split <STACK_ID> <v|h> [INTENT]

           am stack list

           am stack info <STACK_ID>

           am task lock <TASK_ID>

           am task lock stop

           am task resizeable <TASK_ID> [true|false]

    EFT,TOP,RIGHT,BOTTOM>

           am get-config

           am set-inactive [--user <USER_ID>] <PACKAGE> true|false

           am get-inactive [--user <USER_ID>] <PACKAGE>

           am send-trim-memory [--user <USER_ID>] <PROCESS>

    MODERATE|BACKGROUND|RUNNING_LOW|MODERATE|RUNNING_CRITICAL|COMPLETE]

    

    am start: start an Activity.  Options are:

        -D: enable debugging

        -W: wait for launch to complete

    
    --sampling INTERVAL: use sample profiling with INTERVAL microseconds

            between samples (use with --start-profiler)

        -P <FILE>: like above, but profiling stops when app goes idle

    to each repeat,

            the top activity will be finished.

        -S: force stop the target app before starting the activity

        --opengl-trace: enable tracing of OpenGL functions

    
        specified then run as the current user.

    

    am startservice: start a Service.  Options are:

        --user <USER_ID> | current: Specify which user to run as; if not

            specified then run as the current user.

    

    ice.  Options are:

        --user <USER_ID> | current: Specify which user to run as; if not

            specified then run as the current user.

    

    am force-stop: force stop everything associated with <PACKAGE>.

    y user to force stop;

            all users if not specified.

    

    am kill: Kill all processes associated with <PACKAGE>.  Only kills.

      processes that are safe to kill -- that is, will not impact the user

      experience.

    rrent: Specify user whose processes to kill;

            all users if not specified.

    

    am kill-all: Kill all background processes.

    

    am broadcast: send a broadcast Intent.  Options are:

    d to; if not

            specified then send to all users.

        --receiver-permission <PERMISSION>: Require receiver to hold permission.

    

    am instrument: start an Instrumentation.  Typically this target <COMPONENT>

    _CLASS>.  Options are:

        -r: print raw results (otherwise decode REPORT_KEY_STREAMRESULT).  Use with

            [-e perf true] to generate raw output for performance measurements.

    rs a

            common form is [-e <testrunner_flag> <value>[,<value>...]].

        -p <FILE>: write profiling data to <FILE>

        -w: wait for instrumentation to finish before returning.  Required for

            test runners.

    t: Specify user instrumentation runs in;

            current user if not specified.

        --no-window-animation: turn off window animations while running.

        --abi <ABI>: Launch the instrumented process with the selected ABI.

    the process supports the selected ABI.

    

    am profile: start and stop profiler on a process.  The given <PROCESS> argument

      may be either a process name or pid.  Options are:

        --user <USER_ID> | current: When supplying a process name,

    pecify user of process to profile; uses current user if not specified.

    

    am dumpheap: dump the heap of a process.  The given <PROCESS> argument may

      be either a process name or pid.  Options are:

        -n: dump native heap instead of managed heap

        --user <USER_ID> | current: When supplying a process name,

            specify user of process to dump; uses current user if not specified.

    

    am set-debug-app: set application <PACKAGE> to debug.  Options are:

    tion starts

        --persistent: retain this value

    

    am clear-debug-app: clear the previously set-debug-app.

    

    am set-watch-heap: start monitoring pss size of <PROCESS>, if it is at or

    er to report

    

    am clear-watch-heap: clear the previously set-watch-heap.

    

    am bug-report: request bug report generation; will launch UI

        when done to select where it should be delivered.

    

    am monitor: start monitoring for crashes or ANRs.

        --gdb: start gdbserv on the given port at crash/ANR

    

    am hang: hang the system.

        --allow-restart: allow watchdog to perform normal system restart

    

    am restart: restart the user-space system.

    

    e now.

    

    am screen-compat: control screen compatibility mode of <PACKAGE>.

    

    am package-importance: print current importance of <PACKAGE>.

    

    am to-uri: print the given Intent specification as a URI.

    

    pecification as an intent: URI.

    

    am to-app-uri: print the given Intent specification as an android-app: URI.

    

    am switch-user: switch to put USER_ID in the foreground, starting

      execution of that user if it is currently stopped.

    

    er: start USER_ID in background if it is currently stopped,

      use switch-user if you want to start the user in foreground.

    

    am stop-user: stop execution of USER_ID, not allowing it to run any

      code until a later explicit start or switch to it.

      -w: wait for stop-user to complete.

    

    am stack start: start a new activity on <DISPLAY_ID> using <INTENT>.

    

    am stack movetask: move <TASK_ID> from its current stack to the top (true) or   bottom (false) of <STACK_ID>.

    

     <STACK_ID> size and position to <LEFT,TOP,RIGHT,BOTTOM>.

    

    am stack split: split <STACK_ID> into 2 stacks <v>ertically or <h>orizontally

       starting the new stack with [INTENT] if specified. If [INTENT] isn't

     more than one task, then the top task

       of the current task will be moved to the new stack. Command will also force

       all current tasks in both stacks to be resizeable.

    

    am stack list: list all of the activity stacks and their sizes.

    

    ack info: display the information about activity stack <STACK_ID>.

    

    am task lock: bring <TASK_ID> to the front and don't allow other tasks to run.

    

    am task lock stop: end the current task lock.

    

    eable (true) or not (false).

    

    am task resize: makes sure <TASK_ID> is in a stack with the specified bounds.

       Forces the task to be resizeable and creates a stack if no existing stack

       has the specified bounds.

    

    configuration and any recent configurations

      of the device.

    

    am set-inactive: sets the inactive state of an app.

    

    am get-inactive: returns the inactive state of an app.

    

    am send-trim-memory: Send a memory trim event to a <PROCESS>.

    

    TENT> specifications include these flags and arguments:

        [-a <ACTION>] [-d <DATA_URI>] [-t <MIME_TYPE>]

        [-c <CATEGORY> [-c <CATEGORY>] ...]

        [-e|--es <EXTRA_KEY> <EXTRA_STRING_VALUE> ...]

        [--esn <EXTRA_KEY> ...]

    Y> <EXTRA_BOOLEAN_VALUE> ...]

        [--ei <EXTRA_KEY> <EXTRA_INT_VALUE> ...]

        [--el <EXTRA_KEY> <EXTRA_LONG_VALUE> ...]

        [--ef <EXTRA_KEY> <EXTRA_FLOAT_VALUE> ...]

        [--eu <EXTRA_KEY> <EXTRA_URI_VALUE> ...]

    MPONENT_NAME_VALUE>]

        [--eia <EXTRA_KEY> <EXTRA_INT_VALUE>[,<EXTRA_INT_VALUE...]]

            (mutiple extras passed as Integer[])

        [--eial <EXTRA_KEY> <EXTRA_INT_VALUE>[,<EXTRA_INT_VALUE...]]

            (mutiple extras passed as List<Integer>)

       [--ela <EXTRA_KEY> <EXTRA_LONG_VALUE>[,<EXTRA_LONG_VALUE...]]

            (mutiple extras passed as Long[])

        [--elal <EXTRA_KEY> <EXTRA_LONG_VALUE>[,<EXTRA_LONG_VALUE...]]

            (mutiple extras passed as List<Long>)

    RA_FLOAT_VALUE>[,<EXTRA_FLOAT_VALUE...]]

            (mutiple extras passed as Float[])

        [--efal <EXTRA_KEY> <EXTRA_FLOAT_VALUE>[,<EXTRA_FLOAT_VALUE...]]

            (mutiple extras passed as List<Float>)

    XTRA_STRING_VALUE...]]

            (mutiple extras passed as String[]; to embed a comma into a string,

             escape it using "\,")

        [--esal <EXTRA_KEY> <EXTRA_STRING_VALUE>[,<EXTRA_STRING_VALUE...]]

    ; to embed a comma into a string,

             escape it using "\,")

        [--grant-read-uri-permission] [--grant-write-uri-permission]

        [--grant-persistable-uri-permission] [--grant-prefix-uri-permission]

    ped-packages]

        [--include-stopped-packages]

        [--activity-brought-to-front] [--activity-clear-top]

        [--activity-clear-when-task-reset] [--activity-exclude-from-recents]

        [--activity-launched-from-history] [--activity-multiple-task]

      [--activity-no-animation] [--activity-no-history]

        [--activity-no-user-action] [--activity-previous-is-top]

        [--activity-reorder-to-front] [--activity-reset-task-if-needed]

        [--activity-single-top] [--activity-clear-task]

    y-task-on-home]

        [--receiver-registered-only] [--receiver-replace-pending]

        [--selector]

        [<URI> | <PACKAGE> | <COMPONENT>]

    

    

    Error: Bad component name: com.google.android.gsf.login/

    

    usage: am start [-D] [-W] [-P <FILE>] [--start-profiler <FILE>]

                   [--sampling INTERVAL] [-R COUNT] [-S] [--opengl-trace]

                   [--user <USER_ID> | current] <INTENT>

    >

           am stopservice [--user <USER_ID> | current] <INTENT>

           am force-stop [--user <USER_ID> | all | current] <PACKAGE>

           am kill [--user <USER_ID> | all | current] <PACKAGE>

           am kill-all

    | all | current] <INTENT>

           am instrument [-r] [-e <NAME> <VALUE>] [-p <FILE>] [-w]

                   [--user <USER_ID> | current]

                   [--no-window-animation] [--abi <ABI>] <COMPONENT>

    ] [--sampling INTERVAL] <PROCESS> <FILE>

           am profile stop [--user <USER_ID> current] [<PROCESS>]

           am dumpheap [--user <USER_ID> current] [-n] <PROCESS> <FILE>

           am set-debug-app [-w] [--persistent] <PACKAGE>

    app

           am set-watch-heap <PROCESS> <MEM-LIMIT>

           am clear-watch-heap

           am monitor [--gdb <port>]

           am hang [--allow-restart]

           am restart

           am idle-maintenance

           am screen-compat [on|off] <PACKAGE>

    am package-importance <PACKAGE>

           am to-uri [INTENT]

           am to-intent-uri [INTENT]

           am to-app-uri [INTENT]

           am switch-user <USER_ID>

           am start-user <USER_ID>

           am stop-user [-w] <USER_ID>

    <DISPLAY_ID> <INTENT>

           am stack movetask <TASK_ID> <STACK_ID> [true|false]

           am stack resize <STACK_ID> <LEFT,TOP,RIGHT,BOTTOM>

           am stack split <STACK_ID> <v|h> [INTENT]

           am stack list

           am stack info <STACK_ID>

        am task lock <TASK_ID>

           am task lock stop

           am task resizeable <TASK_ID> [true|false]

           am task resize <TASK_ID> <LEFT,TOP,RIGHT,BOTTOM>

           am get-config

           am set-inactive [--user <USER_ID>] <PACKAGE> true|false

         am get-inactive [--user <USER_ID>] <PACKAGE>

           am send-trim-memory [--user <USER_ID>] <PROCESS>

                   [HIDDEN|RUNNING_MODERATE|BACKGROUND|RUNNING_LOW|MODERATE|RUNNING_CRITICAL|COMPLETE]

    

    :

        -D: enable debugging

        -W: wait for launch to complete

        --start-profiler <FILE>: start profiler and send results to <FILE>

        --sampling INTERVAL: use sample profiling with INTERVAL microseconds

    art-profiler)

        -P <FILE>: like above, but profiling stops when app goes idle

        -R: repeat the activity launch <COUNT> times.  Prior to each repeat,

            the top activity will be finished.

    he activity

        --opengl-trace: enable tracing of OpenGL functions

        --user <USER_ID> | current: Specify which user to run as; if not

            specified then run as the current user.

    

    am startservice: start a Service.  Options are:

     <USER_ID> | current: Specify which user to run as; if not

            specified then run as the current user.

    

    am stopservice: stop a Service.  Options are:

        --user <USER_ID> | current: Specify which user to run as; if not

     run as the current user.

    

    am force-stop: force stop everything associated with <PACKAGE>.

        --user <USER_ID> | all | current: Specify user to force stop;

            all users if not specified.

    

    AGE>.  Only kills.

      processes that are safe to kill -- that is, will not impact the user

      experience.

        --user <USER_ID> | all | current: Specify user whose processes to kill;

            all users if not specified.

    

    ground processes.

    

    am broadcast: send a broadcast Intent.  Options are:

        --user <USER_ID> | all | current: Specify which user to send to; if not

            specified then send to all users.

    r to hold permission.

    

    am instrument: start an Instrumentation.  Typically this target <COMPONENT>

      is the form <TEST_PACKAGE>/<RUNNER_CLASS>.  Options are:

        -r: print raw results (otherwise decode REPORT_KEY_STREAMRESULT).  Use with

     [-e perf true] to generate raw output for performance measurements.

        -e <NAME> <VALUE>: set argument <NAME> to <VALUE>.  For test runners a

            common form is [-e <testrunner_flag> <value>[,<value>...]].

    o <FILE>

        -w: wait for instrumentation to finish before returning.  Required for

            test runners.

        --user <USER_ID> | current: Specify user instrumentation runs in;

            current user if not specified.

    n off window animations while running.

        --abi <ABI>: Launch the instrumented process with the selected ABI.

            This assumes that the process supports the selected ABI.

    

     argument

      may be either a process name or pid.  Options are:

        --user <USER_ID> | current: When supplying a process name,

            specify user of process to profile; uses current user if not specified.

    

    s.  The given <PROCESS> argument may

      be either a process name or pid.  Options are:

        -n: dump native heap instead of managed heap

        --user <USER_ID> | current: When supplying a process name,

    rent user if not specified.

    

    am set-debug-app: set application <PACKAGE> to debug.  Options are:

        -w: wait for debugger when application starts

        --persistent: retain this value

    

    am clear-debug-app: clear the previously set-debug-app.

    
    am set-watch-heap: start monitoring pss size of <PROCESS>, if it is at or

        above <HEAP-LIMIT> then a heap dump is collected for the user to report

    

    am clear-watch-heap: clear the previously set-watch-heap.

    

     generation; will launch UI

        when done to select where it should be delivered.

    

    am monitor: start monitoring for crashes or ANRs.

        --gdb: start gdbserv on the given port at crash/ANR

    

    am hang: hang the system.

    w watchdog to perform normal system restart

    

    am restart: restart the user-space system.

    

    am idle-maintenance: perform idle maintenance now.

    

    am screen-compat: control screen compatibility mode of <PACKAGE>.

    

    rrent importance of <PACKAGE>.

    

    am to-uri: print the given Intent specification as a URI.

    

    am to-intent-uri: print the given Intent specification as an intent: URI.

    

    


    am switch-user: switch to put USER_ID in the foreground, starting

      execution of that user if it is currently stopped.

    

    am start-user: start USER_ID in background if it is currently stopped,

    oreground.

    

    am stop-user: stop execution of USER_ID, not allowing it to run any

      code until a later explicit start or switch to it.

      -w: wait for stop-user to complete.

    

    am stack start: start a new activity on <DISPLAY_ID> using <INTENT>.

    

    am stack movetask: move <TASK_ID> from its current stack to the top (true) or   bottom (false) of <STACK_ID>.

    

    am stack resize: change <STACK_ID> size and position to <LEFT,TOP,RIGHT,BOTTOM>.

    

    rtically or <h>orizontally

       starting the new stack with [INTENT] if specified. If [INTENT] isn't

       specified and the current stack has more than one task, then the top task

    force

       all current tasks in both stacks to be resizeable.

    

    am stack list: list all of the activity stacks and their sizes.

    

    am stack info: display the information about activity stack <STACK_ID>.

    

     and don't allow other tasks to run.

    

    am task lock stop: end the current task lock.

    

    am task resizeable: change if <TASK_ID> is resizeable (true) or not (false).

    

    am task resize: makes sure <TASK_ID> is in a stack with the specified bounds.

       Forces the task to be resizeable and creates a stack if no existing stack

       has the specified bounds.

    

    am get-config: retrieve the configuration and any recent configurations

      of the device.

    

     app.

    

    am get-inactive: returns the inactive state of an app.

    

    am send-trim-memory: Send a memory trim event to a <PROCESS>.

    

    <INTENT> specifications include these flags and arguments:

        [-a <ACTION>] [-d <DATA_URI>] [-t <MIME_TYPE>]

     [-c <CATEGORY> [-c <CATEGORY>] ...]

        [-e|--es <EXTRA_KEY> <EXTRA_STRING_VALUE> ...]

        [--esn <EXTRA_KEY> ...]

        [--ez <EXTRA_KEY> <EXTRA_BOOLEAN_VALUE> ...]

        [--ei <EXTRA_KEY> <EXTRA_INT_VALUE> ...]

    ALUE> ...]

        [--ef <EXTRA_KEY> <EXTRA_FLOAT_VALUE> ...]

        [--eu <EXTRA_KEY> <EXTRA_URI_VALUE> ...]

        [--ecn <EXTRA_KEY> <EXTRA_COMPONENT_NAME_VALUE>]

        [--eia <EXTRA_KEY> <EXTRA_INT_VALUE>[,<EXTRA_INT_VALUE...]]

    assed as Integer[])

        [--eial <EXTRA_KEY> <EXTRA_INT_VALUE>[,<EXTRA_INT_VALUE...]]

            (mutiple extras passed as List<Integer>)

        [--ela <EXTRA_KEY> <EXTRA_LONG_VALUE>[,<EXTRA_LONG_VALUE...]]

            (mutiple extras passed as Long[])

     [--elal <EXTRA_KEY> <EXTRA_LONG_VALUE>[,<EXTRA_LONG_VALUE...]]

            (mutiple extras passed as List<Long>)

        [--efa <EXTRA_KEY> <EXTRA_FLOAT_VALUE>[,<EXTRA_FLOAT_VALUE...]]

            (mutiple extras passed as Float[])

    XTRA_FLOAT_VALUE>[,<EXTRA_FLOAT_VALUE...]]

            (mutiple extras passed as List<Float>)

        [--esa <EXTRA_KEY> <EXTRA_STRING_VALUE>[,<EXTRA_STRING_VALUE...]]

            (mutiple extras passed as String[]; to embed a comma into a string,

    cape it using "\,")

        [--esal <EXTRA_KEY> <EXTRA_STRING_VALUE>[,<EXTRA_STRING_VALUE...]]

            (mutiple extras passed as List<String>; to embed a comma into a string,

             escape it using "\,")

    ite-uri-permission]

        [--grant-persistable-uri-permission] [--grant-prefix-uri-permission]

        [--debug-log-resolution] [--exclude-stopped-packages]

        [--include-stopped-packages]

        [--activity-brought-to-front] [--activity-clear-top]

    [--activity-clear-when-task-reset] [--activity-exclude-from-recents]

        [--activity-launched-from-history] [--activity-multiple-task]

        [--activity-no-animation] [--activity-no-history]

    

        [--activity-reorder-to-front] [--activity-reset-task-if-needed]

        [--activity-single-top] [--activity-clear-task]

        [--activity-task-on-home]

        [--receiver-registered-only] [--receiver-replace-pending]

        [--selector]

    <PACKAGE> | <COMPONENT>]

    

    

    Error: Bad component name: com.google.android.gsf.login.LoginActivity

    Rebooting
Image
WBR,
PDUBS
MRT-O-KEY TEAM