New Dongle, 2.60 working ok, but 3.26 not opening
Moderators: VC_INDIA, DYNET, zhulianqi, .::ARD::., Altaf_Azhari, Prince Rajpoot, simonng83
-
- Posts: 15
- Joined: Fri Aug 23, 2019 2:53 am
- Been thanked: 1 time
New Dongle, 2.60 working ok, but 3.26 not opening
hi,
I am a new user.
I got new MRT dongle
When I open 3.26 it says: " Make sure Dae and Time is Right "
and then software just blinks doesn't open.
I have tried restarting pc etc. all basic things with the help of internet. It is not working.
So I downloaded 2.60, this version is working ok.
Can anyone guide me on what to do to use the latest version?
LITTLE MASTER
I am a new user.
I got new MRT dongle
When I open 3.26 it says: " Make sure Dae and Time is Right "
and then software just blinks doesn't open.
I have tried restarting pc etc. all basic things with the help of internet. It is not working.
So I downloaded 2.60, this version is working ok.
Can anyone guide me on what to do to use the latest version?
LITTLE MASTER
-
- Posts: 4
- Joined: Wed Aug 14, 2019 9:48 am
Re: New Dongle, 2.60 working ok, but 3.26 not opening
some time mrt need vpn to working
try use vpn or mobile tethering
try use vpn or mobile tethering
-
- Posts: 15
- Joined: Fri Aug 23, 2019 2:53 am
- Been thanked: 1 time
Re: New Dongle, 2.60 working ok, but 3.26 not opening
I have tried with VPN. by choosing countries India, Indonesia and China.
still the same.
I have tried latest verion 3.27 as well.
Strange thing is ; V2.60 works , mi_unlock_en works.
just not the main version.
Can product supporters help me in this.
still the same.
I have tried latest verion 3.27 as well.
Strange thing is ; V2.60 works , mi_unlock_en works.
just not the main version.
Can product supporters help me in this.
- pintu das
- Posts: 5
- Joined: Sat Aug 17, 2019 12:07 pm
- Location: Narsingdi, Dhaka, Bangladesh
- Has thanked: 22 times
- Been thanked: 14 times
- Contact:
Re: New Dongle, 2.60 working ok, but 3.26 not opening
if didn't working 2.60 you can try with this version viewtopic.php?f=7&t=95
-
- Posts: 15
- Joined: Fri Aug 23, 2019 2:53 am
- Been thanked: 1 time
Re: New Dongle, 2.60 working ok, but 3.26 not opening
as i mentioned already hat i have tried with 3.27
only 2.60 is working
only 2.60 is working
- .::ARD::.
- Posts: 360
- Joined: Tue Aug 13, 2019 7:16 pm
- Has thanked: 133 times
- Been thanked: 555 times
Re: New Dongle, 2.60 working ok, but 3.26 not opening
Redownload again and use vpn with low traffic
Br,
.::ARD::.
__________________________________________________________

.::ARD::.
__________________________________________________________

-
- Posts: 15
- Joined: Fri Aug 23, 2019 2:53 am
- Been thanked: 1 time
Re: New Dongle, 2.60 working ok, but 3.26 not opening
I have tried lots of things but no luck.
Can anyone help on Teamviewer?
I have paid VPN software. Tried a couple of different settings, but still no luck.
ID : 1337531157
Pass : r3rh81
Can anyone help on Teamviewer?
I have paid VPN software. Tried a couple of different settings, but still no luck.
ID : 1337531157
Pass : r3rh81
- .::ARD::.
- Posts: 360
- Joined: Tue Aug 13, 2019 7:16 pm
- Has thanked: 133 times
- Been thanked: 555 times
Re: New Dongle, 2.60 working ok, but 3.26 not opening
Br,
.::ARD::.
__________________________________________________________

.::ARD::.
__________________________________________________________

-
- Posts: 15
- Joined: Fri Aug 23, 2019 2:53 am
- Been thanked: 1 time
Re: New Dongle, 2.60 working ok, but 3.26 not opening
i tried this video , but when i connect to vpn it says
" Error (Error Code 2):
Protocol error occurred. Error was returned from the destination server. "
" Error (Error Code 2):
Protocol error occurred. Error was returned from the destination server. "
-
- Posts: 15
- Joined: Fri Aug 23, 2019 2:53 am
- Been thanked: 1 time